Loop-IP6700 TDMoEthernet
FEATURES:
· 1U height
· WAN port
· One electric Ethernet (10/100 BaseT) or optical Ethernet (10/100 Base-FX)
· Tributary ports
· TDM interfaces
low speed, up to 4 E1/T1
low speed, up to 2 DTE
high speed, 1 E3/DS3
· LAN interface: two 10/100 BaseT Ethernet/SNMP
· Power
· Single AC or DC power
· AC (100 to 240 Vac)
· DC (-36 to -72 Vdc)
· Inband management: through one time slot
(64K bps)
· Pseudo-Wire (PW)
· Max. 64
· Each PW can be assigned a separate VLAN
· Bridging & Switching
· VLAN
· Max. 255 VLAN
· Q-in-Q
· Packet transparency
· Jumbo frame up to 1916 bytes
· QoS
· User configurable CoS
· User configurable ToS in outgoing IP frame
· Packet Delay Variation
· E1: up to 256 ms
· T1: up to 340 ms
· Jitter buffer size: 1 kB to 512 kB
· Min. packetization (pseudowire) latency < 2 ms
· Supports SNTP
· Built-in BERT for E1/T1 to line or WAN direction
· Jitter & Wander
· PPM: per G.823 Traffic
· PPB: per G.823 Synchronous
· Multi-color LED indicators
· Alarm relay
· Management port and interface
· LCD and keypad
· Console port with VT100 menu
· SNMP port:
Embedded SNMP
Telnet
LoopView GUI
Description:
Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the Loop-IP6700 provides a flexible and cost effective choice for the transport of legacy TDM signals. On the WAN side, the Ethernet interface can be 10/100M electric or optical Ethernet. On the tributary side, the TDM ports can be multiple E1, T1, and DTE, or single E3/DS3, each with timing preserved. The Ethernet port can be 10/100 BaseT.
The Loop-IP6700 has built-in AC or DC power. Management choices include console port, Ethernet port, and SNMP port, in addition to Inband management for communication with remote management centers.
For transport of TDM signals E1, T1, E3, DS3, Jitter and Wander adheres to G.823 Traffic and G.823 Synchronous.
|
