Loop-IP6700 TDMoEthernet
FEATURES:
· 1U height, ETSI shelf (full front access) or ANSI shelf (front and back access)
· Point to point and point to multi-points applications
· Pseudo-Wire (PW)
· Max. 256 pseudo-wires (PW), 64 per E1/T1 card
· Each PW can be assigned a separate VLAN
· Aggregate ports:
· 2 combo Gigabit Ethernet (GbE) with 2 RJ45 and 2 SFP housing
· Aggregate Line (1+1) protection
· 2 WAN ports with link aggregation (port trunking)
· Tributary ports:
· Four general purpose hot-swappable slots for:
· Quad E1/T1 cards (software-selectable):
· Up to 16 E1/T1 ports per system
· LAN interface: one 10/100/1000 BaseT Ethernet plus one SNMP port/Ethernet port
· Power Modules
· Fixed: AC & DC (coexistent), 100 to 240 Vac and -36 to -75 Vdc
· Hot-swappable Power:
· -48 Vdc plug-in modules
(-36 to -75 Vdc), dual for redundancy
· AC plug-in module (100 to 240 Vac), dual for redundancy (ANSI only)
· Bridging & Switching
· Jumble frame up to 10k bytes
· VLAN
· Q-in-Q
· Packet transparency
· QoS
· User-configurable CoS
· User-configurable ToS in outgoing IP frame
· Max. 340ms Packet Delay Variation
· Built-in BERT for E1/T1 to line or WAN direction
· Alarm propagation between E1/T1 line and WAN port
· Jitter & Wander
· PPM: per G.823 Traffic
· PPB: per G.823 Synchronous
· Jitter buffer size: Max. 512 kB
· Min. packetization (pseudowire) latency < 1.4 ms
· Multi-color LED indicators
· Alarm relay
· Management port and interface
· LCD and keypad (optional for ANSI shelf only)
· Console port with VT100 menu
· SNMP port:
Ÿ Embedded SNMP v1
Ÿ Telnet
Ÿ LoopView GUI
· Support SNTP
· IETF TDMoIP (RFC5087), SAToP (RFC4553), and CESoPSN (RFC5086) compliance
Description:
As the core communications network migrates from TDM to IP, the Loop-IP6716 is a cost effective choice to transport E1/T1 TDM signals over the new IP network. The Loop-IP6716 TDMoEthernet provides flexible solutions with four hot-swappable slots supporting the 4E1/T1 plug-in cards.
Loop-IP6716 can transport 4, 8, 12, or 16 T1/E1 signals with timing and Ethernet traffic over IP network. Connection to the IP network is through dual WAN ports. The WAN consists of 2 combo Gigabit Ethernet (GbE) with 2 RJ45 and 2 SFP housing. On the user side, the TDM ports can be multiple E1 or T1, each with timing preserved. The Ethernet port is 10/100/1000 BaseT.
Extensive choice of power module includes AC/DC hybrid, single AC, and single DC. Management choices include console port, Ethernet port, and SNMP port for communication with remote management centers. For transport of TDM signals E1, T1, Jitter and Wander adheres to G.823 Traffic and G.823 Synchronous to provide excellent clock recovery.
